42
Download image – This forces a download of the firmware to the controller. Only do this if directed by
an Artos service document.
Tools
Reset Wire Qualification – Not available
Reset Process Qualification – Not available
Turn On Qualification – Not available
Translation List – Text translations screen for all parts of the software other than the I/O Status screen.
See section “LANGUAGE CONFIGURATION AND TRANSLATION”
IO Translation list – Text translations screen for the I/O Status screen. See section “LANGUAGE
CONFIGURATION AND TRANSLATION”
Log Servo – Not available
Help
About CS327 – Shows the version number of the Windows software and the Firmware in the machine.
BAR CODE SCANNING
PART SELECTION
The bar code scanner should be configured so that it outputs data in USB keyboard format and has a CR
suffix. This means you can scan information into any data field that accepts keyboard entry. For
companies that name the parts the same in both the Artos software and on their work orders, a bar code
scanner can be used to select the part. This is especially useful when you have large number of parts
programmed in the Artos software.
To Next Page
Loading...
