FastPak EXP Operating Manual 125
Cleaning Order
Cleaning Order
In general, you should clean the FastPak EXP
starting at the top of the device and moving toward
the bottom.
Exterior Surfaces
Clean the metal exterior surfaces of your ARxIUM
FastPak EXP with a mild solution of isopropyl
alcohol and water, using a clean, lint-free, non-
abrasive cloth.
Touchscreen
Clean the touchscreen with a clean, dampened, lint-
free, non-abrasive cloth. You may use a mild glass
cleaner that does not contain alcohol or ammonia, or
a commercial cleaner especially designed for
touchscreens. When cleaning the screen, turn the
touchscreen off first. Always spray the cleaner onto
the cloth (not directly onto the touchscreen), and then
gently rub the touchscreen to clean it.
Barcode Scanner
If the window is visibly dirty, or if the scanner is not
operating well, clean the window with a soft cloth
dampened with water (or a mild detergent-water
solution). If a detergent solution is used, rinse with a
clean cloth dampened with water only.
The scanner housing may be cleaned in the same
way.
To Next Page
Loading...