Fingerprint Reader
126 FastPak EXP Operating Manual
Fingerprint Reader
If your biometric fingerprint reader appears dirty, or
fails to read fingerprints, you must clean the reader
window. Press the sticky side of a piece of adhesive
tape to the reader window, and lift the tape off.
Repeat as necessary until the reader window is clean.
Canisters
Clean the FastPak EXP
canisters monthly, or more
often as needed. To clean the canisters, do the
following:
1. Remove a canister from the cabinet.
2. Remove any medication from the canister.
3. Wipe the inside of the canister with a clean, dry,
lint-free cloth. If necessary, use warm water after
removing any visible pill dust.
Do not use disinfectant or medical
alcohol to clean the canisters.
If the canister becomes damaged
during maintenance, please
contact ARxIUM for a replacement
canister.
4. When the canister has dried, replace the
medication.
5. Return the canister to the appropriate shelf
position.
6. Push in the shelf and close the upper door.
To Next Page
Loading...