Using the Prefill UTC Tray
40 FastPak EXP Operating Manual
Using the Prefill UTC Tray
Use the Tray Fill report to fill the UTC tray prior to
dispensing. At times, you may need multiple trays for
a batch. When this occurs, you can use the FastPak
EXP prefill UTC trays to set up medication to be
dispensed. When the first tray has been dispensed,
dispensing will stop and the drawer will open.
Simply place the filled prefill tray on top of the UTC
tray, push the levers to open the bottom of the prefill
tray, and then lift the prefill tray off.
Use the Tray Fill report to fill the prefill tray.
Then place the filled tray over the UTC
Open the slots to allow the medication to fill
the UTC tray beneath the prefill tray.
Refer to page 88 for details on using the
prefill trays.
To Next Page
Loading...