Installing Canisters
32 FastPak EXP Operating Manual
Always close the canister lid
completely. Damage may occur
when closing the medication
drawer if a canister lid is not
completely closed.
Installing Canisters
To install FastPak EXP canisters, do the following:
1. Identify the assigned position for each canister.
Canister locations are marked on the front of
each medication drawer and on the top and front
labels of the canister.
2. Place the canister into the target position, taking
care to ensure that the canister is securely seated
in the canister drawer.
3. If there is no sample of the medication in the
canister lid, place a sample in the lid now. This
simplifies refilling.
Installing Smart Canisters
Follow the steps below to install a Smart Canister.
1. Identify a Smart Canister location inside any
medication drawer dedicated for Smart Canister
usage. A Smart Canister motor base is pictured in
Figure
8-2.
2. Place the Smart Canister into a Smart Canister
base, taking care to ensure that the canister is
securely seated in the canister drawer.
3. If there is no sample of the medication in the
canister lid, place a sample in the lid now.
To Next Page
Loading...