ARxIUM FastPak EXP - Sub-Hopper Sensors

FastPak EXP Operating Manual 137
Sub-Hopper Sensors
Sub-Hopper Sensors
There are four sub-hopper sensors (one for each of
the sub-hoppers) which sense the position of the sub-
hoppers. These sensors are visible inside the FastPak
EXP when the front upper panel doors are open and
the sub-hoppers have been removed, as shown below.
Figure 8-10 Sub-hopper sensor
Clean these sensors monthly, using a clean, lint-free
cloth (or Q-tip) or a soft-bristled brush (such as a
toothbrush) to wipe away any dust.
Sub-hopper sensor
in place
and removed from
the device