FastPak EXP Operating Manual 107
Processing Newly-Created Batches
11. Select the RX# field and use the keypad to enter
the order number.
12. Select Apply.
Any missing information is requested.
13. When the medication information is complete, a
confirmation window displays. Select Yes to add
the selected medication to the order.
14. Select Close to close the Medication window.
15. When all medications have been added for the
patient, select Apply.
16. Add patients as needed, following the steps
above.
17. When all patients have been added to the batch,
select Process.
18. Select OK to return to the Main window shown
in Figure
7-1.
Processing Newly-Created Batches
When all new batches have been created to your
satisfaction, they are ready for processing one at a
time. Do the following:
1. In the Main window shown in Figure 7-1,
highlight the new batch.
2. Click Dispense.
3. The Dispense window shown in Figure 7-3
displays. Click the tabs and review the batch
information, as described in
“Dispensing
Batches” on page 69.
To Next Page
Loading...