Dispensing Batches
70 FastPak EXP Operating Manual
Figure 7-3 The Dispense window - batch
preparation
Review the Dispense window before dispensing, to
specify the batch options. There are five tabs along
the bottom of the Dispense window: Batch Options,
Batch Preview, Med List, Tray Fill List, and
Exceptions.
Batch Options Tab
Cut Options
The cut option you select will determine when (or if)
the strip of medication pouches is cut. The cut
options include:
To learn more about
Go to page
Batch Options 70
Batch Preview 76
Med List 83
Tray Fill List 85
Exceptions 90
Cut after batch
To Next Page
Loading...