Dispensing Batches
76 FastPak EXP Operating Manual
Note
The dispense application does not detect a change in
lower packaging unit, except at startup. There is a risk
of incorrect labels if you do not restart the dispense
application after swapping lower packaging units.
Batch Preview Tab
Click the Batch Preview tab to view this window.
Figure 7-7 Batch Preview window
Use the information on the Batch Preview tab to
select either the range of consecutive bags you want
to dispense, or the specific portion of the batch you
want to dispense (non-consecutive bags) by applying
filters.
To Next Page
Loading...