Cutter Blade
150 FastPak EXP Operating Manual
Cleaning the Anvil Pad
Clean the anvil pad when you clean the heat sealer.
Refer to page
134 for instructions. Replace the anvil
pad as necessary when worn or heavily soiled.
Cutter Blade
Cleaning the Cutter Blade
ARxIUM does not recommend cleaning the cutter
blade, due to the risk of personal injury. Replace the
blade when it becomes dull.
Changing the Cutter Blade
Always turn off the power to the
FastPak EXP System when
cleaning or performing
preventive maintenance.
Handle the cutter blade
carefully to avoid injury.
To change the cutter blade, do the following:
1. Open the front door and turn off the power to the
FastPak EXP System.
To Next Page
Loading...