FastPak EXP Operating Manual 85
Dispensing Batches
Skipped medications are those medications that you
don’t want to dispense. If there is a medication in the
batch that you don’t want to dispense (for example, if
you do not have the medication in the pharmacy),
click to highlight the medication line, and then click
Skip Med. If the print skipped medications option is
selected in the Maintenance application (Device
Configurations), skip bags will print for the
medications skipped in unit-dose batches. Skipped
medications will become inactive on the client until
they are refilled.
Medications about to expire must be updated before
dispensing. (The number of days prior to expiration
is set in the Maintenance application.) Click the
medication line, then click Update Med. When the
Drug Information window appears, update the
medication description, lot number, and/or expiration
date, and then click OK to update the medication.
Tray Fill List Tab
The process for dispensing batches containing tray
medications differs slightly from the process for
dispensing batches containing only canister
medications. When you dispense batches that require
dispensing from the UTC, the FastPak EXP software
will prompt you to select the Tray Fill List tab.
If you use prefill trays, the process of dispensing
from the UTC differs from an environment in which
prefill trays are not used.
To Next Page
Loading...