FastPak EXP Operating Manual 129
Medication Drawers
Remove any accumulated pill dust with a vacuum.
Then clean the area between the canister motor bases
with a clean, dry, lint-free cloth, paying special
attention to the label scan sensor on the side of the
Smart Canister motor bases.
Figure 8-2 Motor bases
Do not use medical alcohol to
clean any sensor, as the alcohol
may damage the sensor, thereby
limiting its effectiveness.
Always wear a protective mask
and gloves when cleaning to avoid
inhaling pill dust and to avoid skin
contact with pill dust.
When vacuuming, use caution to
avoid blowing the pill dust.
To Next Page
Loading...