FastPak EXP Operating Manual 31
Filling Canisters
Note
Use a strainer when filling canisters from bulk bottles of
medication that may contain broken pills or pill dust, to
avoid transferring the broken pills and
pill dust to the
canister.
7. Close the canister lid.
8. Place the canister back into its slot inside the
drawer. If you are using the scanner, scan the
barcode on the motor base and on the canister as
prompted.
9. Push the canister drawer securely back into the
FastPak EXP cabinet.
10. Select Continue on the touchscreen to resume
operation.
Do not overfill the canister. Be
sure that the pills are at least ¼"
(12mm) below the top of the
canister.
Make sure the medication you
are adding matches the sample
inside the canister lid and the
information shown on the
canister label.
Pour pills from
bulk bottles into
a strainer.
Discard the pill
dust and any
broken pills
before filling the
canister.
To Next Page
Loading...