FastPak EXP Operating Manual 163
Fuses
a
MPD board fuses: 250V, 2A Time Delay
Power supply box fuses:
• 250V, 2A Time Delay (for 5V power supply, 5 each;
250V 5A Time
• Delay (for 9V power supply, 2 each);
250V, 10A Normal (for 24V power supply, 4 pieces)
Atmospheric
conditions
Temperature: +41°F to +104°F (+5° C to +40° C)
Altitude: Operate at less than or equal to 2,000
meters above sea level
Humidity: Maximum relative humidity 80% for
temperatures up to 87°F (31°
C), decreasing linearly
to 50% relative humidity at 104°F (40°
C)
Electrical stability
requirements
The FastPak EXP will not tolerate any voltage
interruption exceeding 1
ms, except for the power
electronics, or any voltage drops exceeding 0.5
sec.
and exceeding 10% of the power supply rated
voltage. It is desirable to attain a noiseless ground.
Miscellaneous Speed variators, whatever their origin, generate
harmonic current which may feed back into the
network or be otherwise radiated. They may cause
interference that can affect the environment.
a. These fuses may only be replaced by ARxIUM service personnel.
To Next Page
Loading...