FastPak EXP Operating Manual 13
Keypad and LCD Panel
The function of the keys is as follows:
MODE Use to change the mode when the
buffer is empty or while the
machine is warming up.
Use to scroll upwards or
downwards on the LCD panel.
START Use to restart dispensing following
an alarm, when the Dispense
application is not running.
FEED Use to manually advance one
pouch. Use this button to make a
test pouch after replacing the
packaging paper.
CUT Use to manually cut. The
medication strip advances to the
bag exit chute.
CANCEL Hold for 2 seconds to cancel
dispensing after an alarm. Note:
use the Cancel button on the
Dispense application window
rather than this button, when the
Dispense application is running.
STOP Use to stop dispensing.
PAPER SUPPLY When the paper supply is full, all
four lights are lit. The lights
extinguish one by one as the
supply is depleted.
To Next Page
Loading...