SECTION 9 APPENDIX
______________________________________________________________________
9-5
9.3 MENU LISTING
Default values are underlined
Setup Menu:
1. Event
2. Sensor Check
3. Display Type Trend
DSA EEG BIS Log
4. BIS Smoothing Rate (secs.) 15 30
5. Advanced Setup:
a. Secondary Variable OFF
EMG Bursts/Min* SQI SR
b. Time/Date Month Day Year Hour Minute
c. Print Event
d. Display Parameter Setup:
Dual EEG Display** OFF
ON
Filters OFF ON
EEG Sweep Speed (mm/sec) 15 25 30
EEG Amplitude (μv/div) 5 10 25 50 100
BIS Log Interval (minutes) 1 5 15
60
Return to Advanced Setup Menu
e. Diagnostic Menu:
DSC Self Test
Display Self Test
Sensor Data Display:
Sensor Data Screen
Clear Data
Diagnostic Codes OFF
ON
Impedance Checking OFF ON
System Configuration Menu:
Serial Port Protocol ASCII
BINARY
Extended Memory OFF ON
ICU Mode OFF ON
Return to Diagnostic Menu
Return to Advanced Setup Menu
Configuration Information
f. Alarm Menu:
High Alarm Limit OFF
Low Alarm Limit OFF
Alarm Suspend ON OFF
Return to Advanced Setup Menu
g. Language Selection Menu:
Language: English Français
Deutsch Español
Nederlands Italiano
Português Svenska
Return to Advanced Setup menu
h. Save Settings
i. Return to Setup Menu
*This option will display only if a BIS Extend sensor is connected.
**This option will display only if BIS Quatro or BIS Extend sensors are connected.