SECTION 3 OPERATING THE A-2000
______________________________________________________________________
3-15
Language Selection Menu – The A-2000 is designed to support multiple languages.
To display the Language Selection Menu:
1. Press [MENU/EXIT] to access the Setup Menu.
2. Highlight Advanced Setup using the up [↑] or down [↓] arrows.
3. Press [SELECT].
4. Highlight Language Selection Menu using the up [↑] or down [↓] arrows.
5. Press [SELECT].
The Language Selection Menu options are discussed in section 3.4.7.
Save Settings - The A-2000 monitor will always power up configured to settings that
have been saved in memory.
To save the current configuration settings:
1. Press [MENU/EXIT] to access the Setup Menu.
2. Highlight Advanced Setup using the up [↑] or down [↓] arrows.
3. Press [SELECT].
4. Highlight Save Settings using the up [↑] or down [↓] arrows.
5. Press [SELECT] to save setting changes. The current settings will be saved and
the system will exit to the Main Screen.
Notes:
The Save Settings option is disabled when in Battery Backup-Low Power
condition.
Impedance checking always returns to ON and Display Type returns to
Trend after the monitor has been powered down.
Return to Setup Menu - Returns to the previous menu.
1. Press the up [↑] or down [↓] arrows to highlight Return to Setup Menu.
2. Press [SELECT] to re-display the Setup Menu.
To Next Page
Loading...