Ateis IDA8 User Manual

Product Features 263
© 2017, ATEÏS, member of PAX ProAV Group
o 400 (ASCII Code) indicates NG (not received).
The 3rd party device sends a command to hang up a call (intercom/paging/EVAC Announce/Vote
Announce) or a message.
Command-Hangup:
From the example picture above, if you wish to trigger the Hangup action via 3rd party device,
please send a command data as TERRA DS on 3rd party UDP/TCP software. TERRACOM will answer
back in ASCII code as below.
o 200 (ASCII Code) indicates OK (received).
o 400 (ASCII Code) indicates NG (not received).
The 3rd party device sends a command to monitor the source.
Source: Select which source you wish to monitor (SIP/MIC IN/LINE IN/MESSAGE/NET1/NET2/LINE
1/LINE 2).
The 3rd party device sends a command to cancel the monitoring of SIP/MIC IN/LINE IN/MESSAGE/
NET1/NET2/LINE 1/LINE 2 source.
Command-Monitor/Monitor Cancel:
From the example picture above, if you wish to trigger the Monitor/Monitor Cancel action via 3rd
party device, please send a command data as TERRA DS on 3rd party UDP/TCP software. TERRACOM
will answer back in ASCII code as below.
o 200 (ASCII Code) indicates OK (received).
o 400 (ASCII Code) indicates NG (not received).

Ateis IDA8 Specifications

General

Brand	Ateis
Model	IDA8
Category	Controller
Language	English