Ateis IDA8 User Manual

Product Features 265
© 2017, ATEÏS, member of PAX ProAV Group
o Decrease level: Send a command data as TERRA DS: Decrease 5 on 3rd party UDP/TCP software.
Level Read: The 3rd party device sends a command to read back the level of source.
Command-Level Read:
Level Read: From the example picture above, if you wish to read the level of TERRA DS, please send
a command data as TERRA DS on 3rd party UDP/TCP software, it will read and show the level dB
which displays on Audio Matrix page.
ON/OFF Switch Control: The 3rd party device sends a command to switch on/off the Mute function of
source (SIP/MIC/MESSAGE/NET1/MONITOR). The Mute function of source is located at Audio Matrix.
ON/OFF Switch Read: The 3rd party device sends a command to read back the status (ON/OFF) of
source.
Command-ON/OFF Switch Control/Read:
From the example picture above, if you wish to mute the SIP source of TERRA DS, please send a
command data as TERRA DS on 3rd party UDP/TCP software. TERRACOM will answer back in ASCII
code as below.
o 200 (ASCII Code) indicates OK (received).
o 400 (ASCII Code) indicates NG (not received).
The 3rd party device sends a command to read the status (Ready/Paging/Online/Offline) of device.
Command-Device Status:
From the example picture above, if you wish to view the device status of TERRA DS, please send a
command data as TERRA DS on 3rd party UDP/TCP software. TERRACOM will answer back in ASCII

Ateis IDA8 Specifications

General

Brand	Ateis
Model	IDA8
Category	Controller
Language	English