Ateis IDA8 User Manual

IDA8 Global-Net User Manual448
© 2017, ATEÏS, member of PAX ProAV Group
5.9.2 Mono Input
Used for the AES/EBU input, it's very similar to the analog Input component except without Sensitivity
and Phantom Power values.
Control Window
Element Description
Bypass/Mute: Disable/mute the audio channel.
RTO: An input channel 'Routed To Output(s)'.
Overload: Light up if the signal of input channel is bigger
than Overload Thd.
Volume: The VU-Meter shows the channel of RMS level.
Signal: Light up if an audio signal presents above -30 dB
from the chosen 'Sensitivity'.
Level: The signal output level of channel.
Overload Thd.: A threshold value to determine the signal
of channel is overloaded or not.
5.9.3 Stereo Input
Used for the AES/EBU input, it's very similar to the analog Input component except without Sensitivity
and Phantom Power values. The audio input to channel 1 board goes to the component Stereo Input X
channel 1 & 2 and channel 3 to Stereo Input X channel 3 & 4.

Ateis IDA8 Specifications

General

Brand	Ateis
Model	IDA8
Category	Controller
Language	English