To Next Page
D
deleontoddAug 8, 2025
What to do if the Ateis IDA8C PSS AS is unable to connect by ATEIS Studio software?
- SsharihamptonAug 8, 2025
If the PSS-AS cannot connect via Ateis Studio software, first examine the information displayed on the Status Bar of the PSS-AS. Then, ensure the PSS-AS is connected with the audio processor in the configuration table. Verify that the RS485 protocol on the Machine Setting function is selected to the PSS/RWD AIO option and matches your installed port for PSS-AS. If the device or cables are broken, contact Ateis Local personnel.
General
