Ateis IDA8C User Manual

Fault List & Troubleshooting 479
© 2020, ATEÏS. All rights reserved.
Name
Description
Detail
Troubleshooting
error
DSP No Response
No response on DSP
chip communication.
DSP chip
communication fail
Reboot device.
DSP Fault
An error of DSP default
file and hence no audio
output.
DSP fail
Reboot device.
7.2.1 SSI Error
The Audio board control has failed.
Indication:
LED Indicator: When this error is detected, the following LEDs will light up:
o G. Fault LED on the front panel of the IDA8C/S.
Log:
o "SSI error" message displays at the touch screen of the IDA8C.
o A text message displays at the window [Machine Fault Record] in Ateis Studio, see the
picture as below.
A buzzing sound will be outputted to the monitoring speaker on the front panel of the IDA8C.
7.2.2 No Parameter Table
The IDA8 can't find the DSP parameters.
Indication:
LED Indicator: When this error is detected, the following LEDs will light up:
o G. Fault LED on the front panel of the IDA8C/S.
Log:
o "No Parameter Table" message displays at the touch screen of the IDA8C.
o A text message displays at the window [Machine Fault Record] in Ateis Studio, see the
picture as below.
A buzzing sound will be outputted to the monitoring speaker on the front panel of the IDA8C.
7.2.3 Flash Error
The Nand flash inside the IDA8C/S has an error.
Indication:
LED Indicator: When this error is detected, the following LEDs will light up:
o System Fault LED on the front panel of the IDA8C/S.

Ateis IDA8C Specifications

General

Brand	Ateis
Model	IDA8C
Category	Security System
Language	English