Ateis IDA8C User Manual

System Configuration 251
© 2020, ATEÏS. All rights reserved.
Parameter: The element controlled by Sub-Preset.
Value: Value stored in the Sub-Preset.
Link: Click to open the window containing the linked element.
Save: Click to save the current value of elements to the Sub-Preset.
Load: Click to load value stored in the Sub-Preset and set to the linked elements.
5.3 Event Management
5.3.1 Event Manager
The Event Manager is a container to store and manage all the events. The Ateis devices is controlled
by different types of events. Each event can be linked with one controller for adjusting the value or
changing presets. The sources that can be linked to the events are as below,
Event Trigger component
Event Value Control component
PPM AS
PSS AS
TerraManager
Front Panel on some Ateis devices, like IDA8C
Click Event manager button on Tools bar:
To add a new event, the settings window will be shown as below.
Name: The name of an event.
States Count: States count is the number of
states. For example, to control an element like
Mute, you need to set the State Count to 2
since Mute has two states: On and Off.
Type: The type of triggering event.
Add: Add the event to open the popup menu,
see the picture below:

Ateis IDA8C Specifications

General

Brand	Ateis
Model	IDA8C
Category	Security System
Language	English