Ateis IDA8C User Manual

System Configuration 315
© 2020, ATEÏS. All rights reserved.
5.7.1.2 Open/Short Circuit
Open circuit
The open circuit occurs when a break
exists in a complete conducting
pathway.
Once the open circuit is detected, the
IDA8C will open the relay. The following
messages will display on the touch panel
of the IDA8C and in Ateis Studio. See
Line A/B Error.
Short circuit
The short circuit occurs when the
electrical current running across separate
wires accidentally touch each other.
Once the short circuit is detected, the
IDA8C will force open the short-circuited
line to protect the circuitry and the
amplifier from the over-current damage.
If you use both line a/b, the IDA8 keeps
the working line continuous, see the
picture below.
The following messages display on the touch panel of the IDA8C and in Ateis Studio. See Line A/B
Error.
5.7.1.3 Global Settings
Function Settings:
Enable Monitor:

Ateis IDA8C Specifications

General

Brand	Ateis
Model	IDA8C
Category	Security System
Language	English