Ateis IDA8C User Manual

IDA8 Global-Net User Manual360
© 2020, ATEÏS. All rights reserved.
Gate On: Flash when Gate is activated.
Sidechain/Input Gain: Set the volume of the
signal connected in the input S channel/
input I channel.
Hold Time: Adjust the time between the end
level's detection and the end of the Gate
operation.
Release Time: Adjust the fade-out time of signal
when the Gate is no longer activated.
Depth: Attenuate the level when the Gate is
activated.
6.2.9 Limiter/Limiter Stereo
Offer the limitation of volume.
Control Window
Bypass: Disable the Limiter's operation.
Hard Clipping (Limiter): Enable/disable the
“Hard clipping” mode.
Limiting: Light up when the Limiter is activated
(open).
Threshold (dB): Set the threshold level from
where the limiter or compressor will start.
Release Time: Set the time it takes to release
the gain reduction.
Gain reduction (dB): Set the current amount of
gain reduction.
Graphical Control Window: Adjust the
compression ratio by moving the red cursor.
6.3 Equalizer
6.3.1 GEQ/GEQ Stereo
GEQ (Graphic Equalizer) is the input signal which allows users to set its own gain and bandwidth.
There are three types of GEQ: 1 Octave, 2/3 Octave and 1/3 Octave. 1/3 Octave is spoken informally
as "third-octave EQ" because the center frequency of its filters are spaced to one third of an octave

Ateis IDA8C Specifications

General

Brand	Ateis
Model	IDA8C
Category	Security System
Language	English