DSP Components 353
© 2020, ATEÏS. All rights reserved.
The attack time can decide the sensitivity of compressor. The longer of Attack Time is, the
slower of the compression it will take, and vice versa.
Gain Reduction: Reflect the current amount of gain reduction.
Axis
o X/Y: Input/output signal level (dB).
Control Points
o Blue: Adjust Threshold(Compressor).
o Red: Adjust Threshold(Limiter).
6.2.5 DNM-485D/DNM-485S/DNM-ED/DNM-ES
The DNM component is basically the same functions as the A.N.G. component, but the ambient
noise is measured by the DNM-RS485 or DNM-ENET(noise sensing microphone) unit via sensing
microphone input (S.M.).
The difference between of DNM-485D/DNM-ED and DNM-485S/DNM-ES.
D: Dynamically increase/decrease the level based on the background ambient noise.
S: Increase/decrease the level based on a standard value.
Control Window
To Next Page
Loading...
Need help?
General
