Ateis IDA8C User Manual

IDA8 Global-Net User Manual284
© 2020, ATEÏS. All rights reserved.
3. Click [Reset System Fault] to open the window.
4. And Click [Y] to complete this action.
5.4.15 Reset Machine
Allow to reboot the machine by Ateis Studio instead of operating the touch panel.
1. Open [Device Management] window.
2. Search and connect to the device.
3. Click [Reset Machine] to open the control window.
4. Select the units needed to be rebooted first, and click [Reset] to start rebooting.
5.4.16 Download Config
Allow to retrieve the parameters that are stored in the audio processors.
1. Open [Device Management] window.
2. Search and connect to the device.
3. Make sure the firmware version are compatible before configuring "Download Config". Note: Please
go to "Read Version" and "Update" before Download Config.
4. Click [Download Config] to execute the Download Config action.
5. After a pop-up window appears, click Yes/No. Users can save the file if a configuration has
already existed due to the Ateis Studio can only edit a file a time.

Ateis IDA8C Specifications

General

Brand	Ateis
Model	IDA8C
Category	Security System
Language	English