IDA8 Global-Net User Manual274
© 2020, ATEÏS. All rights reserved.
5.4.7.7 Ethernet Adapter
Allow to change the IP, Subnet and Gateway. After changing it, click [Write] button, then reboot the
machine again. The IP address will change to the new one.
5.4.7.8 SMTP Fault Report
Allow to receive fault reports from IDA8 by e-mail.
1. Open [Device Management] window.
2. Search and connect to the device.
3. Click [Fault E-Mail Setting] to open [Fault E-mail Setting] window.
Server IP: Enter the mail server.
Server Port:SMTP port of the mail server. The default value is 25.
Sender: The sender's name, the default is "Devicename@yare.com.tw".
Authentication: Enable to set the username and password for avoiding receiving the spam.
Report By Time: Set 5 different time a day at which the device will send the report.
4. Once the e-mail setting is done, the e-mail sent by the device contains two parts, one is the fault
list and the other is the list of the devices which haven't reported faults. See the picture below,
To Next Page
Loading...
Need help?
General
