IDA8 Global-Net User Manual142
© 2020, ATEÏS. All rights reserved.
7. Store, Online, Calibrate the three DNM devices by each, see Configuration for calibration
procedure.
3.2.4 URC-150/URC-150AS Remote Controller
The URC-150/URC-150AS is a state of the art Universal Remote Controller, which functions as part
of ATEÏS’ IDA8, ECS, LAPG2T and UAPG2. The URC can be fully programmed via ATEÏS’ Studio
software to adjust every setting: level control, preset, components' adjustments, etc. An elegant
OLED for displaying information of parameters or the status. It gives extreme simple design and
cost-effective consideration of with only Two buttons [EXIT], [BACK] and a Knob on control interface.
The RS485 communication protocol allows daisy-chain wiring up to 32 units, providing with a long
distance from the audio processor.
3.2.4.1 Control Panel
OLED Display: Two color OLED.
Exit Button: Back to the main menu.
To Next Page
Loading...
Need help?
General
