Ateis IDA8C User Manual

DSP Components 401
© 2020, ATEÏS. All rights reserved.
6.13.23 Scheduler
Allows to arrange the timing of generating logical pulse to output. The length of pulse is 1 sec. There
are four types of schedulers: Scheduler 1 CH, Scheduler 2 CH, Scheduler 4 CH and Scheduler 8 CH.
The pins on the top side enables(signal = 1) or disables(signal = 0) the scheduler belongings to the
channel. The pins at the button will generate the pulse signal depending on the settings of
component.
Control Window
Scheduler List
Change the channels of scheduler from Scheduler
List.
General Settings
Name: The name of
Scheduler.
Start Time
The start time of the
scheduler.
Stop Condition
Specify the condition to stop a Scheduler. There are three types of
condition:
Continue: In this option, scheduler will never stop. The triggering
setting is always valid.
Number of Times: Scheduler is triggered N times using
triggering setting where N can be set at "Number of Times
parameter".
Stop Time: Scheduler is activated from start time to the time
which set in the "Stop Time parameter".

Ateis IDA8C Specifications

General

Brand	Ateis
Model	IDA8C
Category	Security System
Language	English