Ateis IDA8 User Manual

Product Features 71
© 2017, ATEÏS, member of PAX ProAV Group
send to the engineers.
Fan Error
Fan fail
Replace the fan
3.1.9.1.1 Ethernet Broken
The Ethernet connection fails(if the Ethernet monitoring has been enabled in Aties Studio).
Indication:
LED Indicator: When this error is detected, the following LEDs will light up:
o G. Fault LED on the front panel of the IDA8C/S.
Log:
A text message displays at the touch screen of the IDA8C:
"Ethernet Broken."
A buzzing sound outputs to the monitoring speaker on the front panel of the IDA8C.
Troubleshooting:
Check the Ethernet cable. Once it's recovered, in the LOG page the touch screen shows:
"Ethernet Recovery."
3.1.9.1.2 User Define Error
A user defined error is detected by the IDA8C/S. This kind of error can be defined by using the "Fault
Definer" DSP component.
Indication:
LED Indicator: When this error is detected, the following LEDs will light up:
o G. Fault LED on the front panel of IDA8C/S.
Log:
The text messages display at the touch screen of IDA8C:
"User Define Error"
"XXXXX", where XXXXX is the content defined in "Fault Definer" the DSP component
field [Message].
A text message displays at the window [Machine Fault Record] in Ateis Studio:

Ateis IDA8 Specifications

General

Brand	Ateis
Model	IDA8
Category	Controller
Language	English