Ateis IDA8 User Manual

IDA8 Global-Net User Manual488
© 2017, ATEÏS, member of PAX ProAV Group
Control Window
Element Description
Mute: Mute the sound coming out from
the component.
Level: The level of the pink noise.
5.19.2 Tone
Generates either tone (single frequency) or sweep sequence (between two fixed frequencies and in a
defined interval of time).
Control Window
Element Description
Level: The level of signal.
Tone freq.: If the Tone mode is activated, this item
needs to be selected.
Start freq.: If the Tone mode is activated, this item
needs to be selected.
Stop freq.: Select the maximum frequency for
Sweep mode.
Inc. Time: Select the time between the frequency
changes in Sweep mode.
Mute: Mute the sound coming from the
component.
Sweep: Activate the Sweep mode(sweep of
frequency).
Tone: Activate the Tone mode(one single
frequency played).
Sweep Type: Choose the interval between Min and
Max frequencies (1Octave, 1/3 Octave, ..., etc.).

Ateis IDA8 Specifications

General

Brand	Ateis
Model	IDA8
Category	Controller
Language	English