F/T DAQ Installation and Operation Manual
Document #9610-05-1017-06
ATI Industrial Automation, 1031 Goodworth Drive, Apex, NC 27539 USA +1-919-772-0115 www.ati-ia.com
44
7.2.10 Omega190
English (US) Metric (SI)
Calibration
US-400-3000 US-800-6000 US-1600-
12000
SI-1800-350 SI-3600-700 SI-7200-1400
Rated Sensing Ranges
Fx, Fy ±400 lb ±800 lb ±1600 lb ±1800 N ±3600 N ±7200 N
Fz ±1000 lb ±2000 lb ±4000 lb ±4500 N ±9000 N ±18000 N
Tx, Ty, Tz ±3000 in-lb ±6000 in-lb ±12000 in-lb ±350 Nm ±700 Nm ±1400 Nm
Resolution*
Fx, Fy 5/256 lb 5/128 lb 5/64 lb 3/32 N 3/16 N 3/8 N
Fz 5/128 lb 5/64 lb 5/32 lb 5/32 N 5/16 N 5/8 N
Tx, Ty 5/512 in-lb 5/256 in-lb 5/128 in-lb 5/384 Nm 5/192 Nm 5/96 Nm
Tz 5/768 in-lb 5/384 in-lb 5/192 in-lb 5/576 Nm 5/288 Nm 5/144 Nm
Physical Properties US Metric
Stiffness (Calculated)
X-axis and Y-axis force (Kx, Ky)
1.4×10
6
lb/in 250×10
6
N/m
Z-axis force (Kz)
2.1×10
6
lb/in 370×10
6
N/m
X-axis and Y-axis torque (Ktx, Kty)
14×10
6
in-lb/rad 1.6×10
6
Nm/rad
Z-axis torque (Ktz)
14×10
6
in-lb/rad 3.3×10
6
Nm/rad
Maximum Single-axis Load
Fx, Fy ±8000 lb ±36,000 N
Fz ±25,000 lb ±110,000 N
Tx, Ty, Tz ±49,000 lb ±5500 Nm
Tx, Ty, Tz ±72,000 lb ±8100 Nm
Weight
Transducer with standard plates 14 lb 6.4 kg
Material
Transducer Hardened Stainless Steel
Mounting and tool adaptors Aircraft Aluminum
*Resolutions are typical for a 16-bit data acquisition system.
To Next Page
Loading...
Need help?
General
