ATI Model F12/D Gas Transmitter Part 3 – Electrical Connections
18
O&M Manual (Rev-H)
3.4 Heated Sensor Housing Wiring
The AC Powered and DC Powered models contain a power supply to create the power necessary for the
optional Heated Sensor Housing.
The two pink wires from the heated Sensor Housing connect to terminals 5 and 6 of the AC or DC Power
Supply PCB.
Figure 15 - Heated Sensor Wiring Diagram
Conductor Colors
T/B Pos Sensor
Wires
Generator
Wires
1 WHITE
2 YELLOW
3 BLUE BLUE
4 PURPLE WHITE
5 GRAY
6 GREEN
7 BLACK
8 BROWN BLACK
9 RED RED
10 ORANGE ORANGE
11 WHT / BLK
12 GREEN
IF USING CLOSE COUPLED HEATED
SENSOR (00-1699), WIRE
COLORS WILL BE PINK
IF USING 6 FT. HEATED SENSOR
(00-1878), WIRE COLORS WILL
BE RED.
TRANSMITTER AC OR VDC POWERED VERSION
To Next Page
Loading...