ATI Technologies F12/D - Page 77

ATI Model F12/D Gas Transmitter Part 4 – Operation
76
O&M Manual (Rev-H)
Changing the Security Code
The security code is changed by selecting Change Code from the Security Menu above.
Figure 103. Changing the Security Code
Security
Code= Fail
Enter code to . .
…Security>Change Code
Security
Old Code= 0
…Security>Change Code
Security
Old Code= Pass
…Security>Change Code
Security
Active= No
►Change Code
…Panel>Security
Security
New Code= 0
…Security>Change Code
Security
Repeat= 0
…Security>Change Code
Security
Repeat= Pass
…Security>Change Code
Security
Active= No
►Change Code
…Panel>Security
Security
Repeat= Fail
…Security>Change Code