Configure a company network (LAN) connection
▪ Generate a fixed IP address in your company network.
▪ The IP address will be excluded from the DNS server, so it will be reserved for
the controller.
▪ Get the correct Gateway and Subnet mask settings. For example:
▪ IP = 10.25.43.200
▪ Gateway = 10.25.42.250
▪ Subnet mask = 255.255.254.0
▪ Connect controller to the company’
s network (LAN) with a UTP cable
(min.CAT 5e).
▪ Adapt the network settings in the controller:
▪ Go to Main Menu.
07/2021 - ©Atlas CopcoPage 691950840208_A
Elektronikon® graphic controller
To Next Page
Loading...
Need help?
General
