– Fit outer brake pad -2- in brake caliper.
Note
Fit brake pads into brake caliper and install assembly on brake
carrier/brake disc.
– Secure brake caliper housing to brake carrier with both guide
pins (tighten to 30 Nm).
– Make sure not to twist the brake hose when installing.
– Fit both caps.
– Engage housing retaining spring at the top and at retaining tab
on pad retaining spring -arrows- ...
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
68 Rep. gr.46 - Brakes - mechanism
To Next Page
Loading...
