AudioCodes 445HD - 8.1 Setting up Better Together over Ethernet

400HD Series IP Phones
Administrator's Manual 100 Document #: LTRT-11973
5.8.2 Configuring Call Waiting
Call Waiting can be configured.
 To configure call waiting:
• Use the table as reference.
Table 5-33: Call Waiting Parameters
Parameter Description
voip/services/call_waiting/enabled Enables the Call Waiting feature.
 0 Disable
 1 Enable (default)
voip/services/call_waiting/sip_reply
Determines the SIP response that is sent when another
call arrives while a call is in progress:
 RINGING - 180 Ringing
 QUEUED (default) - 182 Queued
voip/services/call_waiting/generate_ton
e/enabled
Determines whether the phone plays a call waiting tone:
 0 The phone doesn’t play a call waiting tone.
 1 The phone plays a call waiting tone (default).
5.8.3 Configuring Call Forwarding
Call Forwarding can be configured using the configuration file or phone screen. In a
BroadSoft environment, Call Forwarding can be configured in the BroadSoft BroadWorks
application server (see under Appendix A for detailed information).
 To configure call forwarding:
• Use the table as reference.
Table 5-34: Call Forward Parameters
Parameter Description
voip/line/0-5/call_forward/enabled Enables the Call Forward feature.
 0 Disable

1
Enable (default)
voip/line/0-5/call_forward/active
Activates call forwarding, if it was enabled with the
parameter above.
 0 (default) - Disable
 1 Enable
Note: Call Forwarding is typically activated on the
phone screen (see the User's Manual).