400HD Series IP Phones
Administrator's Manual 220 Document #: LTRT-11973
Figure D-2: Verifying Recovery Mode in Wireshark
3. Make sure that the source Ethernet MAC address is the same as that labeled on the
base of the phone. For example:
Figure D-3: Source Ethernet MAC Address in Wireshark Identical to Phone Base's
D.3 Recovering the Phone
The network administrator can recover the phone.
To recover the phone:
1. Configure the PC NIC to which the phone is connected as follows:
• IP address: 192.168.1.1
• Subnet mask: 255.255.255.0
To Next Page
Loading...
