Administrator's Manual A. Configuring Phones in Server-Specific Deployments
Version 3.4.3 209 400HD Series IP Phones
2. Click Add Group.
Figure A-15: Call Answer Group
3. From the ‘Type’ dropdown, select Call Pickup.
4. Enter a Group Name, for example, Call_Pickup_GRP, as shown in the preceding figure.
5. Click the ‘Number’ field; all available numbers are displayed under ‘Numbers’, as shown
in the preceding figure.
6. Select the phone number to route into the group, and then click Accept Number; the
number is displayed in the ‘Number’ field, as shown in the figure below.
Figure A-16: Number
7. From the ‘Alias Status’ dropdown, select Enabled to enable VSC dialing, as shown in
the preceding figure.
8. Click Manage Advanced to configure advanced options.
To Next Page
Loading...
