400HD Series IP Phones
Administrator's Manual 120 Document #: LTRT-11973
5.9.3 Configuring Ringer Volume
The ringer volume can be configured.
Note: It's strongly advisable not to change the default values.
To configure the ringer volume:
• Use the table as reference.
Table 5-58: Ringer Volume Parameters
Parameter Description
voip/audio/gain/ringer_signal_level
Ringing tone volume. This volume can be modified on-the-
fly by pressing the phone's VOLUME key when the phone
is in idle state.
The valid range is -31 to 31 dB
To Next Page
Loading...
