User's Manual 140 Document #: LTRT-71405
MediaPack Series
3. To clear the page of messages, click on the sub-menu Message Log. The page is
cleared. A new session is activated and new messages begin appearing.
Note: Do not keep the Message Log screen activated and minimized for a
prolonged period as a long session may cause the PC workstation to overload.
While the page is open (even if minimized), a session is in progress and messages
are sent. Closing the window or moving to another link stops the messages and
terminates the session.
6.7.1.2 Device Information
The Device Information page displays hardware, software device information and Device
state information. This information can help you to expedite any troubleshooting process.
Capture the page and email it to Technical Support personnel to ensure quick diagnosis
and effective corrective action.
The page also displays any loaded files in the device.
To display the Device Information page:
Open the Device Information page (Status & Diagnostics tab > System Status menu >
Device Information).
Figure 100: Device Information
To delete any loaded files:
1. From the toolbar, click on the Status and Diagnostics link. The Status and
Diagnostics page appears.
2. From the navigation tree, click the Device Information link. The Device Information
page appears.
3. In the Device Information table, click Delete. The file deletion takes effect only after a
device reset is performed.
4. From the toolbar, click Device Actions followed by Reset. The Reset page appears.
5. Select the Burn option and click Reset to restart the device with the new settings.
To Next Page
Loading...
