AudioCodes MP-112R User Manual

User's Manual 4. Device Initialization & Configuration Files
Version 6.6 31 MediaPack Series

VoicePromptsFileName - The name (and path) of the file containing the voice
prompts. This file should be constructed using the “TrunkPack Conversion Utility”
supplied as part of the software package on the CD accompanying the MediaPack.
The Voice Prompt buffer size in the blade is 1 Mbyte.
The Voice Prompt buffer size is also controlled by the software upgrade key. For more
information contact an AudioCodes representative.

CallProgressTonesFilename - The name (and path) of the file containing the Call
Progress and User-Defined Tones definition.

PrerecordedTonesFileName - The name (and path) of the file containing the
Prerecorded Tones. This file should be constructed using the "TrunkPack Conversion
Utility" supplied as part of the software package on the CD accompanying the device.

DialPlanFileName - The name (and path) of the file containing dial-plan configuration
for CAS protocols. This file should be constructed using the "TrunkPack Conversion
Utility" supplied as part of the software package on the CD accompanying the device.

FXSLoopCharacteristicsFileName - The name (and path) of the file providing the FXS
line characteristic parameters.

SaveConfiguration - (default = 1 = enabled) This parameter replaces the following
parameters: BlastCallProgressSetupFile, BlastVoicePromptsFile. When enabled, all
configuration and downloadable files are stored in non-volatile memory.
4.4.2.2 Automatic Update Facility
The device is capable of automatically downloading updates to the ini file, auxiliary files
and firmware image. Any standard Web server, FTP server or NFS server may be used to
host these files.
The Automatic Update processing is performed:

Upon device start-up (after the device is operational)

At a configurable time of day, e.g., 18:00 (disabled by default)

At fixed intervals, e.g., every 60 minutes (disabled by default)

If Secure Startup is enabled (refer to Secure Startup), upon start-up but before the
device is operational.
The Automatic Update process is entirely controlled by configuration parameters in the ini
file. During the Automatic Update process, the device contacts the external server and
requests the latest version of a given set of URLs. An additional benefit of using HTTP
(Web) servers is that configuration ini files would be downloaded only if they were modified
since the last update.
The following is an example of an ini file activating the Automatic Update Facility.
# DNS is required for specifying domain names in URLs
DnsPriServerIP = 10.1.1.11
# Load extra configuration ini file using HTTP
INIFILEURL = 'http://webserver.corp.com/AudioCodes/inifile.ini'
# Load call progress tones using HTTPS
CPTFILEURL = 'https://10.31.2.17/usa_tones.dat'
# Load voice prompts, using user "root" and password "wheel"
VPFILEURL = 'ftps://root:wheel@ftpserver.corp.com/vp.dat'
# Update every day at 03:00 AM
AutoUpdatePredefinedTime = '03:00'

AudioCodes MP-112R Specifications

General

Brand	AudioCodes
Model	MP-112R
Category	Gateway
Language	English