AudioCodes MP-112R - Parameter Value Structure

User's Manual 26 Document #: LTRT-71405
MediaPack Series
...
; Tables Format Rules:
[Table_Name]
; Fields declaration
Format Index_Name_1 ... Index_Name_N = Param_Name_1 ...
Param_Name_M
; Table's Lines (repeat for each line)
Table_Name Index_1_val ... Index_N_val = Param_Val_1 ...
Param_Val_M
[\Table_Name]
4.4.1.1 Parameter Value Structure
The following are the rules in the ini File structure for individual ini file parameters
(Parameter = Value):

Lines beginning with a semi-colon ';' (as the first character) are ignored.

A carriage-return/line-feed must be the final character of each line.

The number of spaces before and after "=" is not relevant.

If there is a syntax error in the parameter name, the value is ignored.

Syntax errors in the parameter value field can cause unexpected errors (because
parameters may be set to the incorrect values).

Sub-section names are optional.

String parameters, representing file names, for example,
CallProgressTonesFileName, must be placed between two inverted commas ('…').

The parameter name is NOT case sensitive; the parameter value is usually case
sensitive.

Numeric parameter values should be entered only in decimal format.

The ini file should be ended with one or more empty lines.
The example below shows a sample ini file for the MediaPack.
[MGCP]
EndpointName = 'ACgw'
CallAgentIP = 192.1.10.3
CallAgentPort = 2427
BaseUDPPort = 4000
FlashHookPeriod = 700
[Channel Params]
DJBufferMinDelay = 75
RTPRedundancyDepth = 1