User's Manual 6. Configuration Using the Web Interface
Version 6.6 71 MediaPack Series
10. If the device was originally operating in HTTPS mode and you disabled it in Step 2,
then return it to HTTPS by setting the 'Secured Web Connection (HTTPS)' parameter
to HTTPS Only, and then reset the device with a flash burn.
Notes:
• The certificate replacement process can be repeated when necessary
(e.g., the new certificate expires).
• It is possible to use the IP address of the device (e.g., 10.3.3.1) instead of
a qualified DNS name in the Subject Name. This is not recommended
since the IP address is subject to change and may not uniquely identify the
device.
• The device certificate can also be loaded via the Automatic Update Facility
by using the HTTPSCertFileName ini file parameter.
To Next Page
Loading...
