AudioCodes MP-112R - Page 81

User's Manual 6. Configuration Using the Web Interface
Version 6.6 81 MediaPack Series
Parameter Description
Web: Session Timeout Defines the duration (in minutes) of Web inactivity of a logged-in user,
after which the user is automatically logged off the Web interface.
The valid value is 0 to 100000. The default is according to the settings
of the 'Session Timeout' global parameter (see Web Security Settings
on page
82).
Web: Block Duration Defines the duration (in seconds) for which the user is blocked when
the user exceeds a user-defined number of failed login attempts. This
is configured by the 'Deny Access On Fail Count' parameter (see Web
Security Settings on page
82).
The valid value is 0 to 100000, where 0 means that the user can do
as many login failures without getting blocked. The default is
according to the settings of the 'Deny Authentication Timer' parameter
((see Web Security Settings on page 82).
Note: The 'Deny Authentication Timer' parameter relates to failed
Web logins from specific IP addresses.
Web: User Level Defines the user's access level.
 Monitor = (Default) Read-only user. This user can only view Web
pages and access to security-related pages is denied.
 Admin = Read/write privileges for all pages, except security-related
pages including the Web Users table where this user has only
read-only privileges.
 SecAdmin = Read/write privileges for all pages. This user is the
Security Administrator.
 Master-User = Read/write privileges for all pages. This user also
functions as a security administrator.
Notes:
 At least one Security Administrator must exist. The last remaining
Security Administrator cannot be deleted.
 The first Master user can be added only by a Security
Administrator user.
 Additional Master users can be added, edited and deleted only by
Master users.
 If only one Master user exists, it can be deleted only by itself.
 Master users can add, edit, and delete Security Administrators (but
cannot delete the last Security Administrator).
 Only Security Administrator and Master users can add, edit, and
delete Admin and Monitor users.