Version 7.2 1185 Mediant 1000B Gateway & E-SBC
User's Manual 62. Configuration Parameters Reference
Parameter Description
HTTP Remote Hosts Table
HTTP Remote Hosts
configure system > http-
services > http-remote-
hosts
[HTTPRemoteHosts]
Defines remote HTTP hosts per remote Web service.
The format of the ini file table parameter is as follows:
[HTTPRemoteHosts]
FORMAT HTTPRemoteHosts_Index =
HTTPRemoteHosts_HTTPRemoteServiceIndex,
HTTPRemoteHosts_RemoteHostIndex, HTTPRemoteHosts_Name,
HTTPRemoteHosts_Address, HTTPRemoteHosts_Port,
HTTPRemoteHosts_Interface,
HTTPRemoteHosts_HTTPTransportType,
HTTPRemoteHosts_HostStatus;
[\HTTPRemoteHosts]
For a description of the table, see ''Configuring Remote HTTP Hosts''
on page 267.
62.13.5 HTTP Proxy Parameters
The HTTP Proxy service parameters are described in the table below.
Table 62-80: HTTP Proxy Service Parameters
Parameter Description
HTTP Proxy Application
configure network >
http-proxy settings >
http-proxy-app
[HTTPProxyApplication]
Enables the HTTP Proxy application.
ï‚§ [0] Disable (default)
ï‚§ [1] Enable
Note: For the parameter to take effect, a device reset is required.
HTTP Interfaces Table
HTTP Interfaces
configure network >
http-proxy > http-
interface
[HTTPInterface]
Defines local listening interfaces for receiving HTTP/S requests from
Web clients for HTTP/S-based services.
The format of the ini file table parameter is as follows:
[ HTTPInterface ]
FORMAT HTTPInterface_Index = HTTPInterface_InterfaceName,
HTTPInterface_NetworkInterface, HTTPInterface_Protocol,
HTTPInterface_Port, HTTPInterface_TLSContext,
HTTPInterface_VerifyCert;
[ \HTTPInterface ]
For a description of the table, see ''Configuring HTTP Interfaces'' on
page 273.
HTTP Proxy Services Table
HTTP Proxy Services
configure network >
http-proxy http-proxy-
serv
[HTTPProxyService]
Defines HTTP Proxy based services.
The format of the ini file table parameter is as follows:
[ HTTPProxyService ]
FORMAT HTTPProxyService_Index =
HTTPProxyService_ServiceName,
HTTPProxyService_ListeningInterface,