User's Manual 70 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
The following information is displayed:
'Access Level': User level of the currently logged in user (e.g., Security Administrator).
'Session Time': Duration of the current Web session (starting from login).
The Log Out button is also provided for logging out of the Web session (see ''Logging Off
the Web Interface'' on page 64).
6.5 Configuring Web Session and Access Settings
The following procedure describes how to configure security features related to Web user
sessions and access.
Note: You can only perform the configuration described in this section if you are a
management user with Security Administrator level or Master level. For more
information, see ''Configuring Management User Accounts'' on page 65.
To configure Web user sessions and access security:
1. Open the Web Settings page (Setup menu > Administration tab > Web & CLI folder
> Web Settings).
2. Under the Session group, configure the following parameters:
Figure 6-22: Configuring Web User Sessions
• 'Password Change Interval': Duration (in minutes) of the validity of the Web login
passwords. When the duration expires, the user must change the password in
order to log in again.
• 'User Inactivity Timeout': If the user has not logged into the Web interface within
this duration, the status of the user becomes inactive and the user can no longer
access the Web interface. The user can only log in to the Web interface if its
status is changed (to New or Valid) by a Security Administrator or Master user
(see ''Configuring Management User Accounts'' on page 65).
• 'Session Timeout': Duration (in minutes) of inactivity (i.e., no actions are
performed in the Web interface) of a logged-in user, after which the Web session
expires and the user is automatically logged off the Web interface and needs to
log in again to continue the session. You can also configure the functionality per
user in the Local Users table (see ''Configuring Management User Accounts'' on
page 65), which overrides this global setting.