User's Manual 738 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Note:
• You can automatically load Auxiliary files from a remote server using the device's
Automatic Update mechanism (see Automatic Update Mechanism).
• Saving Auxiliary files to flash memory may disrupt traffic on the device. To avoid
this, disable all traffic on the device by performing a graceful lock as described in
''Locking and Unlocking the Device'' on page 729.
43.1.1.1 Loading Auxiliary Files through Web Interface
The following procedure describes how to load Auxiliary files through the Web interface.
Note:
• When loading an ini file through the Auxiliary Files page (as described in this
section), only parameter settings specified in the ini file are applied to the device;
all other parameters remain at their current settings.
• If you load an ini file containing Auxiliary file(s), the Auxiliary files specified in the
file overwrite the Auxiliary files currently installed on the device.
 To load Auxiliary files through Web interface:
1. Open the Auxiliary Files page:
• Toolbar: From the Actions drop-down menu, choose Auxiliary Files.
• Navigation tree: Setup menu > Administration tab > Maintenance folder >
Auxiliary Files.
To Next Page
Loading...
Need help?
General
