AudioCodes MSBG Series User Manual

Version 7.2 77 Mediant 1000B Gateway & E-SBC
User's Manual 7. CLI-Based Management
Shortcut Key Description
? (question mark)
 Displays a list of all subcommands in the current mode, for example:
(config-network)# ?
access-list Network access list
dhcp-server DHCP server
configuration
dns DNS
configuration
...
 Displays a list of available commands beginning with certain letter(s),
for example:
(config-network)# d?
dhcp-server DHCP server
configuration
dns DNS
configuration
 Displays syntax help for a specific command by entering the command,
a space, and then a question mark (?). This includes the range of valid
values and a brief description of the next parameter expected for that
particular command. For example:
(config-network)# dns srv2ip ?
[0-9] index
If a command can be invoked (i.e., all its arguments have been entered),
the question mark at its end displays "<cr>" to indicate that a carriage
return (Enter) can now be entered to run the command, for example:
(config)# logging host 10.1.1.1 ?
<cr>
<Ctrl + A> Moves the cursor to the beginning of the command line.
<Ctrl + E> Moves the cursor to the end of the command line.
<Ctrl + U> Deletes all the characters on the command line.
auto finish
You need only enter enough letters to identify a command as unique. For
example, entering "int G 0/0" at the configuration prompt provides you
access to the configuration parameters for the specified Gigabit-Ethernet
interface. Entering "interface GigabitEthernet 0/0"
would work as well, but is
not necessary.
Space Bar at the --More-
-prompt
Displays the next screen of output. You can configure the size of the
displayed output, as described in ''Configuring Displayed Output Lines in
CLI Terminal Window'' on page 85.
7.1.3 Common CLI Commands
The following table contains descriptions of common CLI commands.
Table 7-2: Common CLI Commands
Command Description
do
Provides a way to execute commands in other command sets without taking the
time to exit the current command set. The following example shows the do
command, used to view the GigabitEthernet interface configuration while in the

AudioCodes MSBG Series Specifications

General

Brand	AudioCodes
Model	MSBG Series
Category	Gateway
Language	English